We proudly market Anthracite coal from the coal fields of
Pennsylvania. Historically this is the cleanest burning coal
available. Anthracite, commonly known as hard coal, has been
commercially mined and prepared in our region for over 100
years. Anthracite is a natural high carbon, clean burning
solid fuel with a typical sulfur content of less than 0.7% and
volatile matter of just 4% to 6%. In fact, Anthracite is the
cleanest burning solid fuel on the commercial market today. It
has lower sulfur content than some heavy fuel oils. Its uses
range from residential and commercial to industrial carbon and
water filtration media.
Like all other sources of energy, anthracite’s heat value is
measured in British Thermal Units (BTUs). There are about 25
million btus per ton of Anthracite. This is the equivalent of
180 gallons of home heating oil and 260 therms of natural gas.
Current estimates show between 300 to 500 years of Anthracite
reserves still remain in the ground today.
Coal rank and quality can have a major impact on power
plant and metallurgy heat rate, on capital cost, generation
costs, and of course performance. The heat, carbon, moisture,
ash, and sulfur contents all play an important role in the
value of the coal. We feel proudly that Anthracite is the
best coal in the world, and Pennsylvania has the words largest
supply of this clean burning high quality fuel.
We know you will be excited about being able to provide this
resource to your customers and hope that you will
find this product just as valuable as we do.
OK - So How
Can We Help You?
First provide us with amount you are
interest in purchasing, the breaker size (Broken 4" x
8" Stove 2 7/16" x 1 5/8" Nut 1 5/8 " x 13/16" Pea
13/16" x 9/16" Buckwheat 9/16" x 5/16" Rice 5/16" x
3/16" Barley 3/16" x 3/32" Buckwheat #4 3/32" x
3/64" Buckwheat #5 3/64" x 100M) and the price per ton
you are looking to pay.
Why
should I use Anthracite coal?
Look at this
chart, comparing coal quality and charteristics

Some real benefits to our program
-
Often confused with bituminous or soft coal,
Anthracite is naturally high in carbon (86% to
92%) and low in sulfur (less than 0.8%).
Because Anthracite is harder than Bituminous
coal it has a more consistent burn time and it
is virtually smokeless.
- In
addition to its clean air qualities, the
mining and use of Anthracite provides the
added benefit of reclaiming the regions lands
and surface and sub-surface water systems.
- When
compared with other major heating fuel sources
on a BTU basis, Anthracite is considerably
more cost effective
So - How Do You
Get Started?
It's easy - just call
Nypanet
at (570) 473-6972
and we'll get the ball rolling. In 30 days
you will have answers to your printer fleet
for questions you didn't even know you had!
Be sure
and ask how you can receive a FREE
evaluation report on your printer fleet
valued at $2000.00 !
Call NOW! The longer you wait - the
more money you are loosing!
OK - So what
about other energy solutions?
We sell and service Solar, Wind,
Hydroelectric Solutions for industry
worldwide